| No. | Brand | D | G | w | S | H | B | a | d |
| MCR-22-SBC | SMITH | 12.81 to 13.81 in | - | - | - | - | - | - | - |
| MYR-20-C | SMITH | - | - | - | - | - | 25 mm | - | 75 mm |
| BYR-3/4-XC | SMITH | - | - | - | - | - | - | - | - |
| MFCR-85 | SMITH | 85 mm | - | - | - | - | 25 mm | - | 68 mm |
| HR-7/8-C | SMITH | 140 mm | - | - | - | - | - | - | 65 mm |
| BYR-1-1/2-X | SMITH | 7.0000 in | - | - | - | - | - | - | - |
| CR-3-1/4-C | SMITH | 60 mm | - | - | - | - | - | - | 55 mm |
| BCR-1-1/8 | SMITH | - | - | - | - | - | 60 mm | - | - |
| DCR-1-7/8 | SMITH | - | - | - | - | - | - | - | - |
| HR-5/8-XB | SMITH | 68 mm | - | - | - | - | 60 mm | - | 60 mm |
| MCRV-85-SB | SMITH | - | - | - | - | - | 1.41 in | - | 1.2500 in |
| BYR-7/8 | SMITH | 165mm | - | - | - | - | 18mm | - | 130mm |
| MCRV-13-S | SMITH | 93.5 to 114.3 mm | - | - | - | - | 1-3/16 in | - | 25 mm |
| CR-1/2-XB-SS | SMITH | - | - | - | - | - | - | - | - |
| MCRV-30-BC | SMITH | 4.1250 in | - | - | - | - | - | - | 1.6250 in |
| MFCR-35 | SMITH | - | - | - | - | 64.5 mm | - | - | - |
| BYR-1-3/4-X | SMITH | 5.1250 in | - | - | - | - | - | - | 1.9375 in |
| HR-1-7/8-C | SMITH | - | - | - | - | - | - | - | 4.3304 in |
| YAS-06 | SMITH | 620 mm | - | - | - | - | 150 mm | - | - |
| CR-11/16 | SMITH | - | - | - | - | - | - | - | 3.1875 in |
| CR-1-3/4-XB | SMITH | - | - | - | - | - | - | - | - |
| HR-2-1/4-BC | SMITH | - | - | - | - | - | - | - | 3.8125 in |
| HR-1-X | SMITH | 1-3/16 in | - | - | - | - | - | - | 7/8 in |
| SMITH CR-4-XB Cam Follower and Track Roller - Stud Type | housing material:Cast Iron; manufacturer upc number:662327657673; seal type:Contact Seal; bore type:Round; locking device:Set Screw; bearing type:Spherical Roller; mounting:Two-Bolt Base; d:3.9375 in; |
| SMITH YAS-12 Cam Follower and Track Roller - Yoke Type | operating temperature range:-65 to +250 &de; maximum rpm:550 RPM; internal clearance:C0; closure type:Double Seal; bearing material:Steel; axial dynamic load capacity:1850 lb; standards met:AISI 52100; fillet radius:0.04 in; inside diameter:4.5000 in; cage material:Brass/Non-Metal; |
| SMITH CR-1-1/2-X Cam Follower and Track Roller - Stud Type | series:AD52; precision rating:RBEC 1 (ISO Cla; finish/coating:Uncoated; d:19 mm; cage material:Brass; closure type:Open; internal clearance:C0; bore type:Straight; flanges:(2) Outer; |
| SMITH CR-3-1/4-C Cam Follower and Track Roller - Stud Type | series:IR; type of needle bearing:Inner Ring; d:55 mm; closure type:N/A; D:60 mm; lubrication hole type:No Lubrication Hole; standards met:DIN 620; width:25 mm; minimum radius:0.6 mm; material:Chrome Steel; |
| SMITH MYR-40-C Cam Follower and Track Roller - Yoke Type | fillet radius:0.6 mm; maximum rpm:7000 RPM; series:ZARN; closure type:Open; bearing type:Needle Roller/A; D:52 mm; B:60 mm; radial bearing outside diameter:30 mm; d:20 mm; cage material:Plastic; |
| SMITH CR-1-1/4-XBC-SS Cam Follower and Track Roller - Stud Type | maximum rpm:5400 rpm; B:2.3750 in; base to bore centerline:2.3750 in; bolt size:0.5000 in; overall length:9.0000 in; radial dynamic load capacity:15060 lbs; duty type:Medium Duty; Weight:12.5 lbs; seal type:Triple Lip; housing material:Cast Iron; |
| SMITH YR-1-1/8-X-SS Cam Follower and Track Roller - Yoke Type | duty type:Medium Duty; series:MSF; d:2.1875 in; D:5.6250 in; operating temperature range:+200 to +4; lubrication type:Lubrication Fitting; maximum rpm:1250 RPM; replacement bearing:3-23; bore type:Round; mounting type:Four-Bolt Flange; |
| SMITH HR-5/8-XB Cam Follower and Track Roller - Stud Type | d:60 mm; B:60 mm; D:68 mm; Tolerance shaft:h8; Permissible sliding velocity v max.:5 m/s; Coefficient of friction µ max.:0.1; Specific dynamic load factor K:10 N/mm²; Specific static load factor K0:20 N/mm²; Tolerance housing:H7; Mass bushing:0.3 kg; |
SMITH IRR-2-7/8 Roller Bearings Video