| SMITH MPCR-40 Cam Follower and Track Roller - Stud Type | r3,4 min.:0.6 mm; r1,2 min.:0.3 mm; Preload:1650 N; Mass bearing:0.32 kg; a:73 mm; Basic dynamic load rating C:27.5 kN; Frictional moment:0.15 N·m; Basic static load rating C0:51 kN; d2:32.2 mm; da min.:25 mm; |
| SMITH CR-3 Cam Follower and Track Roller - Stud Type | standards met:RoHS; overall length:125 mm; material specification:2000; wear product type:Wear Plate; material:2000; maximum pv value:Dry 1.63, Periodic l; series:CWP; operating temperature range:-40 to +248 &de; maximum v value:Dry 0.50;Period; maximum p value:Dry 24.5;Dry St; |
| SMITH MCR-19-SBC Cam Follower and Track Roller - Stud Type | Basic dynamic load rating C:9.23 kN; ra max.:0.6 mm; r1,2 min.:0.6 mm; Calculation factor (single, tandem) Y2:0.87; Calculation factor f2C:1.08; Calculation factor f2B:1.04; Static axial stiffness, preload class A:81 N/µm; Preload class D GD:480 N; rb max.:0.3 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; |
| SMITH IRR-1-15/16 Bearings | inner ring width:1.5625 in; finish/coating:Black Oxide; radial static load capacity:2567 lb; outer ring width:0.8750 in; d:1.1250 in; series:ER-T; operating temperature range:-20 to +180 &de; seal type:Felt; D:2.4409 in; radial dynamic load capacity:4381 lb; |
| SMITH CR-1-1/8-XBC-SS Cam Follower and Track Roller - Stud Type | mounting type:Three-Bolt Bracket S; radial static load capacity:2538 lb; B:5.4800 in; bolt circle diameter:1.8800 in; length through bore:3.2 in; expansion type:Non-Expansion Bearin; operating temperature range:-40 to +180 &de; duty type:Standard Duty; d:1.1875 in; manufacturer catalog number:129557; |
| SMITH CR-1-3/4-XBC Cam Follower and Track Roller - Stud Type | series:UCFCX00; unit standoff:1-19/32 in; bore type:Round; duty type:Medium Duty; pilot diameter:4-41/64 in; length through bore:2.189 in; bolt size:1/2; replacement bearing:UCX10-32; radial dynamic load capacity:9700 lbf; housing material:Cast Iron; |
| SMITH MFCR-125 Cam Follower and Track Roller - Stud Type | SKU:mf115-2rs-zen; Availability:In Stock; B:4mm; D:11mm; d:5mm; Seals or Shields:Two Rubber Seals; Weight:0.20 KGS; Clearance:Standard; Cage Type:Steel; |
| SMITH MFCR-85 Cam Follower and Track Roller - Stud Type | series:RNA; D:85 mm; lubrication hole type:Lubrication Groove &; standards met:DIN 617, ISO 1206, I; precision rating:Not Rated; B:25 mm; needle bearing type:Machined Bearing wit; d:68 mm; maximum rpm:6300 RPM; static load capacity:26100 lbf; |