No. | Brand | D | G | w | S | H | B | a | d |
YAS-12 | SMITH | - | - | - | - | - | - | - | - |
VCR-2-E | SMITH | - | - | - | - | - | - | - | 55mm |
MCRV-52-B | SMITH | - | - | - | - | - | - | - | 36 mm |
MCRV-62-SC | SMITH | - | - | - | - | - | 1.52 in | - | 1.1875 in |
MYRV-15-S | SMITH | - | - | - | - | - | - | - | 0.4375 in |
FYR-3-1/2 | SMITH | - | - | - | - | - | 3.59 in | - | 2.9375 in |
CR-7/8-X | SMITH | 2.3125 in | - | - | - | - | - | - | 1.7500 in |
MCR-26 | SMITH | - | - | - | - | - | 2.7500 in | - | - |
MVYR-150 | SMITH | 12.0000 in | - | - | - | - | - | - | 5.0000 in |
PCR-1-1/4 | SMITH | 62 mm | - | - | - | - | - | - | 30 mm |
CR-1-1/8-XBC-SS | SMITH | - | - | - | - | - | 5.4800 in | - | 1.1875 in |
FYR-7 | SMITH | 17.2500 in | - | - | - | - | - | - | - |
BCR-1-1/8 | SMITH | - | - | - | - | - | 60 mm | - | - |
MPCR-40 | SMITH | - | - | - | - | - | - | 73 mm | - |
MCRV-85-S | SMITH | 180 mm | - | - | - | - | 41 mm | - | - |
MCRV-52-BC | SMITH | - | - | - | - | - | 3-1/2 in | - | - |
CR-2-3/4 | SMITH | - | - | - | - | - | 13 mm | - | 35 mm |
IRR-2-1/8 | SMITH | - | - | - | - | - | - | - | - |
MCR-85-SBC | SMITH | - | - | - | - | - | - | - | 1.5000 in |
CR-5/8-XC | SMITH | - | - | - | - | - | - | - | - |
CR-3/4-B | SMITH | 24 mm | - | - | - | - | 7 mm | - | 9 mm |
CR-5/8-BC | SMITH | 15/16 in | - | - | - | - | - | - | - |
BCR-2-XC | SMITH | - | - | - | - | - | 3-1/16 in | - | - |
VCR-5-1/2 | SMITH | 130 mm | - | - | - | - | 31 mm | - | - |
MYRV-5-S | SMITH | - | - | - | - | - | 21 mm | - | 35 mm |
CR-1-5/8-C | SMITH | 540 mm | - | - | - | - | 192 mm | - | 300 mm |
HR-2-1/4-BC | SMITH | - | - | - | - | - | - | - | 3.8125 in |
MCRV-85-SB | SMITH | - | - | - | - | - | 1.41 in | - | 1.2500 in |
CR-2-1/4-B | SMITH | 170 mm | - | - | - | - | - | - | 80 mm |
SMITH MCR-26 Cam Follower and Track Roller - Stud Type | closure type:Double Shielded; precision rating:Not Rated; standards met:ABMA, ISO; B:2.7500 in; static load capacity:144500 lbs; bearing material:Chrome Steel; needle bearing type:Machined Bearing wit; dynamic load capacity:29400 lbs; fillet radius:0.09375 in; cage material:Steel; |
SMITH YR-1-1/8-X-SS Cam Follower and Track Roller - Yoke Type | duty type:Medium Duty; series:MSF; d:2.1875 in; D:5.6250 in; operating temperature range:+200 to +4; lubrication type:Lubrication Fitting; maximum rpm:1250 RPM; replacement bearing:3-23; bore type:Round; mounting type:Four-Bolt Flange; |
SMITH MCRV-26 Cam Follower and Track Roller - Stud Type | B:8.4688 in; radial dynamic load capacity:14000 lbf; mounting type:Four-Bolt Piloted; radial static load capacity:9900 lbf; locking device:Set Screw; length through bore:2.937 in; housing material:Cast Iron; seal type:Contact with Flinger; lubrication type:Lubrication Fitting; pilot diameter:5-29/32 in; |
SMITH CR-1-5/8-C Cam Follower and Track Roller - Stud Type | D:540 mm; internal clearance:C0; manufacturer upc number:029176316487; cage material:Brass; d:300 mm; bore type:Straight; B:192 mm; |
SMITH HR-1-3/8-XB Cam Follower and Track Roller - Stud Type | replacement bearing:UC205-16C4HR5; base to bore centerline:1.4375 in; series:UCPA200C4HR5; B:1-17/32 in; mounting:Tapped Base; d:1.0000 in; bore type:Round; overall height:2.8281 in; lubrication type:Lubrication Fitting; base width:1-1/2 in; |
SMITH MYRV-15-S Cam Follower and Track Roller - Yoke Type | grade:Precision; head width:0.437 in; misalignment angle:14 °; race material:Steel; d:0.4375 in; shank thread size:7/16-20 in; head diameter:1.125 in; standards met:SAEJ1120; ball width:0.562 in; thread direction:Left Hand; |
SMITH MCRV-62-SC Cam Follower and Track Roller - Stud Type | series:206 (SCU); mounting:Two-Bolt Base; lubrication type:Lubrication Fitting; d:1.1875 in; bore type:Round; expansion type:Non-Expansion Bearin; B:1.52 in; base to bore centerline:1.6900 in; overall height:3.3100 in; standards met:UL, AFBMA, AGMA, ASM; |
SMITH HR-3-BC Cam Follower and Track Roller - Stud Type | thread direction:Left Hand; misalignment angle:17 º; head width:0.4060 in; series:CG; grade:Precision; Weight:0.18 lb; thread type:UNF-2B-LH; manufacturer catalog:www.aurorabearing.co; ball material:440 C Stainless Stee; length to ball center:1.8120 in; |
SMITH YR-1-1/4 Cam Follower and Track Roller - Yoke Type Video