No. | Brand | D | G | w | S | H | B | a | d |
MUTD-17 | SMITH | - | - | - | - | - | 3.3750 in | - | 70 mm |
YR-1-X | SMITH | - | - | - | - | - | - | - | - |
PCR-1-1/4 | SMITH | 62 mm | - | - | - | - | - | - | 30 mm |
HR-1-7/8-C | SMITH | - | - | - | - | - | - | - | 4.3304 in |
MCRV-72-BC | SMITH | - | - | - | - | - | - | - | - |
IRR-1-15/16 | SMITH | 2.4409 in | - | - | - | - | - | - | 1.1250 in |
MCR-40 | SMITH | - | - | - | 0.794 mm | 144.463 mm | 85.725 mm | - | - |
MPCR-40 | SMITH | - | - | - | - | - | - | 73 mm | - |
VCR-6-1/2 | SMITH | 13-1/4 in | - | - | - | - | 5-1/16 in | - | - |
HR-3-1/2-C | SMITH | 130mm | - | - | - | - | 31mm | - | 60mm |
MCR-85-B | SMITH | 22mm | - | - | - | - | 7mm | - | - |
BCR-1-1/8 | SMITH | - | - | - | - | - | 60 mm | - | - |
MCRV-26 | SMITH | - | - | - | - | - | 8.4688 in | - | - |
MCRV-13-S | SMITH | 93.5 to 114.3 mm | - | - | - | - | 1-3/16 in | - | 25 mm |
MCRV-35-BC | SMITH | - | - | - | - | - | - | - | - |
MYRV-45-S | SMITH | 14.7500 in | - | - | - | - | - | - | 6.3750 in |
BCR-1/2-XC | SMITH | 20 mm | - | - | - | - | - | - | - |
CR-2-3/4-XBE | SMITH | 2.8750 in | - | - | - | - | - | - | - |
FYR-3-1/2 | SMITH | - | - | - | - | - | 3.59 in | - | 2.9375 in |
PCR-2-1/4-E | SMITH | - | - | - | - | - | - | - | - |
BCR-1/2-XB | SMITH | - | 459.003 mm | - | - | - | 60.579 mm | - | 460 mm |
CR-7/8-X | SMITH | 2.3125 in | - | - | - | - | - | - | 1.7500 in |
BCR-1-3/4-XC | SMITH | - | - | - | - | - | - | - | - |
HR-7/8-XC | SMITH | 3.5433 in | - | - | - | - | 1.1240 in | - | 1.9375 in |
MYR-40-C | SMITH | 52 mm | - | - | - | - | 60 mm | - | 20 mm |
HR-1-1/8-X | SMITH | 120mm | - | - | - | - | - | - | - |
IRR-1/2-1 | SMITH | 204 mm to 228 mm | - | - | - | - | 136 mm | - | - |
SMITH MCRV-80-SC Cam Follower and Track Roller - Stud Type | radial dynamic load capacity:1510 lbf; maximum rpm:11000 RPM; roller width:11.8 mm; roller diameter:24 mm; roller shape:Flat; closure type:Sealed; bearing element:Needle Rollers; standards met:ISO 281, ISO 6278; d:8 mm; finish/coating:Uncoated; |
SMITH BYR-1-1/2-X Cam Follower and Track Roller - Yoke Type | internal clearance:C0; closure type:Open; maximum rpm:2000 RPM; inside diameter:5.0000 in; D:7.0000 in; bearing material:Steel; standards met:MIL-PRF-3150, AISI 5; radial static load capacity:6730 lbf; axial static load capacity:20200 lbf; radial dynamic load capacity:6840 lbf; |
SMITH BYR-1-3/4-X Cam Follower and Track Roller - Yoke Type | operating temperature range:Maximum of +110; mounting type:Four-Bolt Flange; D:5.1250 in; manufacturer upc number:7316577344236; d:1.9375 in; expansion type:Non-Expansion Bearin; finish/coating:Uncoated; lubrication type:Lubrication Fitting; length through bore:64.4 mm; seal type:Contact with Flinger; |
SMITH DCR-1-7/8 Cam Follower and Track Roller - Stud Type | series:D52; |
SMITH YR-7/8-X-SS Cam Follower and Track Roller - Yoke Type | maximum rpm:1800 rpm; d:180 mm; outer ring type:Not Split; outer ring width:52 mm; fillet radius:2 mm; cage material:Brass; inner ring width:52 mm; lubrication hole type:Lubrication Groove &; closure type:Open; finish/coating:Uncoated; |
SMITH CR-3/4-B Cam Follower and Track Roller - Stud Type | D:24 mm; B:7 mm; snap ring included:Without Snap Ring; bore type:Round; d:9 mm; closure type:Two Contact Seals; manufacturer catalog number:2612; |
SMITH HR-3-BC Cam Follower and Track Roller - Stud Type | thread direction:Left Hand; misalignment angle:17 º; head width:0.4060 in; series:CG; grade:Precision; Weight:0.18 lb; thread type:UNF-2B-LH; manufacturer catalog:www.aurorabearing.co; ball material:440 C Stainless Stee; length to ball center:1.8120 in; |
SMITH CR-5/8-AC Cam Follower and Track Roller - Stud Type | bearing type:Spherical Roller; overall height:4.5625 in; radial dynamic load capacity:22000 lb; seal type:Triple Lip; bore type:Round; radial static load capacity:24000 lb; housing construction:Solid Pillow Block; expansion type:Non-Expansion Bearin; housing material:Cast Iron; lubrication type:Lubrication Fitting; |
SMITH PCR-3-1/2-E Cam Follower and Track Roller - Stud Type Video